Bargain HyperX Fury 8GB 2133MHz DDR4 CL14 SDRAM DIMM 288 pin Memory Stockists
 

HyperX Fury 8GB 2133MHz DDR4 CL14 SDRAM DIMM 288-pin Memory Stockists

HyperX Fury 8 GB 2133 MHz DDR4 CL14 SDRAM - DIMM 288-pin Memory Product Specifications General Capacity  8 GB Upgrade Type  Generic Memory Type  DRAM Technology  DDR4 SDRAM Form Factor  DIMM 288-pin Module Height (inch)  1.34 Speed 2133 MHz ( PC4-17000 ) Latency Timings CL14 ( 14-14-14 ) Data Integrity Check  Non-ECC Features: Single rank, black heatsink, On-Die Termination (ODT), Serial Presence Detect (SPD), Black PCB, low profile heat spreader, FURY asymmetric heatspreader, sixteen banks, Intel Extreme Memory Profiles (XMP 2.0) , unbuffered Module Configuration  1024 x 64 Chips Organization  1024 x 8 Voltage 1.2 V Lead Plating Gold RAM Performance SPD - 2133 MHz - 1.2 V - CL14 - 14-14-14  Intel Extreme Memory Profiles (XMP 2.0) - 2133 MHz - 1.2 V - CL14 - 14-14-14 Miscellaneous Colour Category Black Manufacturer Warranty Service & Support  Limited lifetime warranty ( Russia - 10 years )

Bargain Deal: £68.99

HyperX Fury 8GB 2133MHz DDR4 CL14 SDRAM DIMM 288-pin Memory Deals on eBay HyperX Fury 8GB 2133MHz DDR4 CL14 SDRAM DIMM 288-pin Memory Deals on Amazon
StockistProductPrice 
EbuyerHyperX Fury 8GB 2133MHz DDR4 CL14 SDRAM DIMM 288-pin Memory£68.99Visit Store
 
 

HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory

HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM  Black Memory DESCRIPTION...

HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM  Black Memory DESCRIPTION HyperX HX424C15FB2/8 is a 1G x 64-bit (8GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows: Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS. JEDEC/XMP TIMING PARAMETERS JEDEC/PnP: DDR4-2400 CL15-15-15 @1.2V                        DDR4-2133 CL14-14-14...


 
 

HyperX Blue Fury Series 8GB 1866MHz DDR3 CL10 DIMM (Kit of 2) Memory

SPECIFICATIONS CL(IDD) 10 cycles Row Cycle Time (tRCmin) 44.75ns (min.)...

SPECIFICATIONS CL(IDD) 10 cycles Row Cycle Time (tRCmin) 44.75ns (min.) Refresh to Active/Refresh 260ns (min.) Command Time (tRFCmin) Row Active Time (tRASmin) 32.125ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V - 0 Operating Temperature 0oC to 85o C Storage Temperature -55oC to +100o C *Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 933MHz fCK for 1866Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential...


 
 

16GB 1333MHz DDR3 CL9 DIMM (Kit of 2) HyperX Fury Series

Get in the game with HyperX FURY. Even newbies get up to speed fast, since...

Get in the game with HyperX FURY. Even newbies get up to speed fast, since FURY automatically recognises its host platform and automatically overclocks to up to 1866MHz, providing plenty of power for your next death match. FURY's asymmetric heatspreader design lets you stand out from the crowd. It's available in black, blue, red and -- for the first time in the HyperX line -- white, with a black PCB. So your rig can reflect your style and you can show it off with pride. It's 100-percent tested and LAN-ready plus it's backed by free technical support. HyperX PnP memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. HyperX FURY is available in frequency speeds from 1333MHz to 1866MHz. Reach faster speeds and higher capacities by just installing the memory, no adjustments...


 
 

HyperX Fury 4GB 1866MHz DDR3 CL10 DIMM Memory

SPECIFICATIONS CL(IDD) 10 cycles Row Cycle Time (tRCmin) 44.75ns (min.)...

SPECIFICATIONS CL(IDD) 10 cycles Row Cycle Time (tRCmin) 44.75ns (min.) Refresh to Active/Refresh 260ns (min.) Command Time (tRFCmin) Row Active Time (tRASmin) 32.125ns (min.) Maximum Operating Power TBD W* UL Rating 94 V - 0 Operating Temperature 0oC to 85o C Storage Temperature -55oC to +100o C *Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 933MHz fCK for 1866Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data...


 
 

HyperX Fury Red 8GB 1600MHz DDR3 CL10 DIMM Memory

Get in the game with HyperX FURY. Even newbies get up to speed fast, since...

Get in the game with HyperX FURY. Even newbies get up to speed fast, since FURY automatically recognises its host platform and automatically overclocks to up to 1866MHz, providing plenty of power for your next death match. FURY's asymmetric heatspreader design lets you stand out from the crowd. It's available in black, blue, red and -- for the first time in the HyperX line -- white, with a black PCB. So your rig can reflect your style and you can show it off with pride. It's 100-percent tested and LAN-ready plus it's backed by free technical support. HyperX PnP memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. HyperX FURY is available in frequency speeds from 1333MHz to 1866MHz. Reach faster speeds and higher capacities by just installing the memory, no adjustments...





Copyright © bargainplace.co.uk Inc. All Rights Reserved.