Bargain HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory Stockists
 

HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory Stockists

HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM  Black Memory DESCRIPTION HyperX HX424C15FB2/8 is a 1G x 64-bit (8GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows: Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS. JEDEC/XMP TIMING PARAMETERS JEDEC/PnP: DDR4-2400 CL15-15-15 @1.2V                        DDR4-2133 CL14-14-14 @1.2V XMP Profile #1: DDR4-2400 CL15-15-15 @1.2V SPECIFICATIONS CL(IDD) 15 cycles Row Cycle Time (tRCmin) 46.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin)  350ns(min.) Row Active Time (tRASmin) 29.125ns(min.) Maximum Operating Power TBD W* UL Rating 94 V - 0 Operating Temperature  0oC to +85oC Storage Temperature -55oC to +100oC *Power will vary depending on the SDRAM used. FEATURES Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP - 2.5V Typical VDDSPD = 2.2V to 3.6V Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals Low-power auto self refresh (LPASR) Data bus inversion (DBI) for data bus On-die VREFDQ generation and calibration Single-rank On-board I2 serial presence-detect (SPD) EEPROM 16 internal banks; 4 groups of 4 banks each Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) Selectable BC4 or BL8 on-the-fly (OTF) Fly-by topology Terminated control command and address bus Height 1.340” (34.04mm), w/o heatsink

Bargain Deal: £71.99

HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory Deals on eBay HyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory Deals on Amazon
StockistProductPrice 
EbuyerHyperX Fury 8GB 2400MHz DDR4 CL15 DIMM Black Memory£71.99Visit Store
 
 

HyperX Fury Black 16GB (8GB x2 Kit) DDR4-2133MHz Cl 14 DIMM Memory

.rpd-row { overflow: hidden; padding: 30px 0; border-bottom: 1px solid...

.rpd-row { overflow: hidden; padding: 30px 0; border-bottom: 1px solid #eee; } .rpd-row h3 { font-size:22px; } .rpd-row img { max-width: 100%; } .rpd-left { float: left; width: 47.5%; padding-right: 2.5%; } .rpd-right { float: right; width: 50%; } .rpd-img { text-align:center; } Plug and play Get the speed you want, hassle free. HyperX FURY DDR4 is the first product line to offer automatic overclocking up to the highest frequency published. Optimised for Intel’s 200 Series and X99 chipsets HyperX FURY DDR4 memory is 100% tested and optimised for compatibility and easy overclocking. To complete a motherboard featuring 200 Series or X99 chipsets, you need the latest generation of DRAM technology – DDR4 memory. Low power consumption DDR4’s lower power requirements mean less heat and higher reliability. Low 1.2 volts draw less power from your system, which results...


 
 

HyperX 8GB 1600MHz DDR3 Non-ECC CL9 DIMM (Kit of 2) XMP HyperX Savage

Attack the competition with HyperX Savage memory. Its unique, asymmetrical...

Attack the competition with HyperX Savage memory. Its unique, asymmetrical red heat spreader is made from high-quality aluminum and has a black PCB and a diamond cut finish to make your game shine and help you stand out in the crowd. The heat spreader dissipates heat so your system stays cool and reliable and its low profile fits under oversized CPU coolers. Featuring a design that works well with the latest trends in gaming, HyperX Savage comes in a wide range of high-performance speeds, from 1600MHz to 2400MHz, and capacities from 4GB to 8GB in single modules and 8GB to 32GB kits. In CL9-CL11 latencies, it delivers ultra-responsive multitasking and an overall faster system. Dual and quad channel kits are available. Built-in, hand-tuned XMP profiles let users reach higher-performing frequencies, timings and voltages simply by enabling Intel's XMP tool. Even noobs can overclock their platforms with...


 
 

HyperX Fury Red 16GB 1600MHz DDR3 CL10 DIMM (Kit of 2) Memory

SPECIFICATIONS CL(IDD) 10 cycles Row Cycle Time (tRCmin) 48.125ns (min.)...

SPECIFICATIONS CL(IDD) 10 cycles Row Cycle Time (tRCmin) 48.125ns (min.) Refresh to Active/Refresh 260ns (min.) Command Time (tRFCmin) Row Active Time (tRASmin) 37.5ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V - 0 Operating Temperature 0oC to 85o C Storage Temperature -55oC to +100o C *Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800MHz fCK for 1600Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential...


 
 

HyperX Impact Black 8GB 1866MHz DDR3L CL11 SODIMM 1.35V Memory

HyperX HX318LS11IB/8 is a 1G x 64-bit (8GB) DDR3L-1866 CL11 SDRAM...

HyperX HX318LS11IB/8 is a 1G x 64-bit (8GB) DDR3L-1866 CL11 SDRAM (Synchronous DRAM) 2Rx8, low voltage, memory modules, based on sixteen 512M x 8-bit DDR3 FBGA compo-nents. This module has been tested to run at DDR3L-1866 at a low latency timing of 11-11-11 at 1.35V or 1.5V. Additional timing parameters are shown in the PnP Timing Parameters section below.   FEATURES JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply Bi-directional Differential Data Strobe VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) 933MHz fCK for 1866Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6, 5 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either...


 
 

HyperX Savage 16GB Kit (4x4GB) DDR4 3000MHz XMP CL15 DIMM Memory

HyperX HX430C15SB2K4/16 is a kit of four 512M x 64-bit (4GB) DDR4-3000...

HyperX HX430C15SB2K4/16 is a kit of four 512M x 64-bit (4GB) DDR4-3000 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-3000 at a low latency timing of 15-17-17 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows: XMP TIMING PARAMETERS JEDEC: DDR4-2133 CL15-15-15 @1.2V XMP Profile #1: DDR4-3000 CL15-17-17 @1.35V XMP Profile #2: DDR4-2666 CL14-15-15 @1.35V SPECIFICATIONS CL(IDD)  15 cycles Row Cycle Time (tRCmin) 46.5ns (min.) Refresh to Active/Refresh Command Time (tRFCmin) 260ns (min.) Row Active Time (tRASmin) 33ns (min.) Maximum Operating...





Copyright © bargainplace.co.uk Inc. All Rights Reserved.